DL 2110B PROGRAMMABLE LOGIC CONTROLLER - 38 IN/34 OUT

The programmable logic controller (PLC) allows controlling machines and installations by using the sequential logic that replaces the traditional electromechanical boards, allowing, therefore, to save relays, timers and counters. Moreover, the main advantages in the use of the PLC are the flexibility, because they can be re-programmed, the industrial characteristics, thanks to the possibility of their use in environments with heavy working conditions, the reliability and the safety, typical of the solid state technology that has no moving contacts, as well as the possibility to process analogue signals.

DL 2110A PROGRAMMABLE LOGIC CONTROLLER - 24 IN/16 OUT

This unit has technical and functional characteristics similar to the ones of the DL 2110B, but it is composed of the CPU only with 24 inputs and 16 relay outputs.

Complete with the programming software.

DL 2110AH PROGRAMMABLE LOGIC CONTROLLER – 12 IN/8 OUT

Easy to be programmed from its own panel, without computer.

It is composed (including the extension module) of 12 inputs power supplied at 24 Vdc and 8 relay outputs.

Simulation of the inputs through switches and externally through terminals.

The programming software is also supplied to allow programming the PLC from the computer, if so preferred.

DL 2110-131K PROGRAMMABLE LOGIC CONTROLLERS MODULAR TRAINER

This modular trainer allows the study of PLC and/or MMI.

The modular panel is a tubular steel structure, treated with electrostatic painting, dimensions: w= 660 mm, h=935 mm, d=350mm. It has 4 lines for manual and fast fixation of the modules without the need for tools.

Each module is made of steel plate, treated with electrostatic painting. All terminals and connection points are available through 2 or 4 mm terminals (according to the voltage). The dimensions of the modules are 200 x 110 mm. or multiples.