DL 1010B MANUAL COIL WINDER

To be fixed to the bench, it allows the manual winding of motor coil or of linear windíngs without wire guide.

DL 1010D BOBBINHOLDER WITH COLUMN

Column to be fixed to the bench, complete with bobbin holder with wire stretcher and two regulating springs.

DL 1012, DL 1012C MACHINE FOR LAYER WINDING

For wires 0.06 to 1.4 mm. diam.
Max. diam. of bobbins 180 mm.
Min. length of bobbins 5 mm.
Winding spindle diam. 10 mm.
Distance between centres 250 mm.
2 winding speeds: 1400 and 3000 rpm
2 speed gear
Mechanical reversal: automatic or manual
Clockwise rotation of the machine (anticlockwise on request)

The machine is supplied with:

1 bobbin holder for wires 0.05 - 0.2
1 bobbin holder for wires 0.3 - 2.0
1 special bobbin holder column
1 single phase motor with electronic rheostat
1 mechanical rev. counter with 5 figures
1 table with drawer of steel sheet

Net weight: 104 kg Dimensions: 800 x 800 x 1600 mm.

DL GM500 WINDING MACHINE FOR ROTOR WINDINGS

TECHNICAL DATA :

TO REWIND MOTOR UP HP 50
SPEEDS r.p.m. 0÷900
ELECTRIC MOTOR Kw 0,55 V.230 Hz50/60
900 r.p.m. C.I.F IP54
SPEED VARIATOR DIGITAL INVERTER
COMPLETE FRAME ALLUMINIUM
FEEDING LINE 1x230V 50/60Hz 1Kw
DIMENSIONS 830 X 810 1490 mm (with table)
NET WEIGHT Kg 127 (with table)

EQUIPMENT :
no. 1 Faceplate diam. 500 mm
no. 1 Pair of square mandrels
no. 2 Pairs of arbors diam. 40-80 mm
no. 1 digital preset counter
no. 1 motor with brake
no. 1 safety guard

DL GM600 MOTOR WINDER

Max diam. Rotor mm 100
Max length rotor mm 130
Max length rotor shaft mm 400
Max diam wire mm 1,5
Speeds r.p.m.: 0 - 900
Electric motor: Kw 0,55 V.230 Hz50/60; 900 r.p.m. C.I.F. IP54
Speed variator: Digital Inverter
Complete frame: alluminium
Feeding line: 1x230V 50/60Hz 1kW
Dimensions mm 980x870x1650 table included
Weight kg 155 table included
Supplied with:
- 1 faceplate diam. 500 mm
- 2 rotor support
- 1 grippers with fast locking and rotating jaw for winding into straight and raking slots
- 1 bobbin-holder type TC/RFR supplied with column and box diam. 220 mm
- 1 motor with brake
- 1 safety guard